|
|
 |
 |
 |
|
Price List for Bare Hulls and Mouldings
| |
| Prices as at June 2011 E&0E |
Mk IV
Boat 16 |
Treeve
DS18 |
Treeve
DS20 |
Treeve
DS24 |
BARE HULLS
All MCA and SEAFISH Approved |
£3,393 |
£??00 |
£7,625 |
£??00 |
| 'Specials' |
All hulls can be modified to customers requirements |
| Our new moulding shop has been fully approved by the SEAFISH Authority. All hulls have an MCA Certificate MSN1813(F) |
| MCA/SEAFISH CERTIFICATION |
| |
Available for MkIV 16ft
Counterstern 10in Angle |
Ribs to SIFA standard, with timber
inserts at 50cm spacing |
| Clear Bottom or Two-Tone Colour |
| Beamshelf |
Flocoating
(white, grey below waterline) |
| Aft seat and Locker |
| Fore Deck with Locker |
| |
| ENGINE BOX in GRP |
| Sound Proofing kit (installed) |
| Bulk Heads, full GRP coated ply |
| Bulk Heads, half GRP coated |
Samson and Quarter Posts
(oak, stainless steel pins) |
| |
CORNISH CUDDIES AND
WHEELHOUSES (fitted) |
| Aft Bulkhead with door and Windows |
Cornish:-
Moulding (including foredeck) |
| Free Standing Trawler Wheelhouse |
Door for
Free Standing Trawler Wheelhouse |
Windows
(10mm laminated glass) |
| Whaleback |
| |
| GUNWALES |
| Moulded GRP |
Timber hardwood including knees,
breasthooks, capping (imported
hardwood) teak oil finished. |
| |
| ENGINE BEDS |
| Outboard Internal Transom |
Heavy Duty GRP encapsulated
Hardwood |
| Longitudinals |
| Slatted Seats-each |
| |
| BILGE KEELS |
| Hardwood, fitted - 6" |
| Hardwood, fitted - 9" |
| GRP Beaching Keel |
| |
| MIZZEN MAST |
| Steel gantries |
| Sail rigging |
| |
| RUDDERS |
Transom hung (Timber) with stainless
steel Fittings |
| Stainless Steel Underhung |
| |
| KEEL IRONS |
Inclusive of stem band and heavy duty
skeg |
| In Stainless Steel |
| Fitting Charge for the above |
| |
| DECKS |
Loose board 175x25mm (7x1")
in sections |
Marine Ply
(finished with non-slip) |
Watertight including engine and fish
hatches |
| Anti-fouling bottom and paintwork |
| BALLAST CAST IN RESIN |
per tonne |
| ENGINES |
|
|
|
|
Recommended BETA MARINE Engines
|
16hp
|
20hp
|
25hp
|
43hp
|
Discounts available
| MACHINERY |
|
Engine Installation Package.
(includes stern tube, shaft and propeller. Fuel
System, Exhaust. Water system, Engine controls,
Battery, wiring and bilge pumps). |
| Morse of hydraulic steering |
Deluxe Control Panel
(inc Flexi-coupling) |
| |
| SEA TRIALS |
| In the local vacinity |
|
Price list for finished boats options available on request
| |
Option one - SFA hulls with ribs at 18" centres and beam shelf fitted out with GPR gunwales, ply removable wash down deck, hard wood bilge keels, full set of keel and skeg flow coated and anti fouled.
TB16 Mk4
TB18
TB20 Mk2
Option two - as above with full hard wood box gunnels, hard wood rubber inclusive of SS fittings love board pine deck in removable sections, hard wood engine beds and longitudinal's over laminated, GRP engine box, oak Sampson and quarter posts with SS pins.
TB16 Mk4
TB18
TB20 Mk2
Option three - as above with four deck and locker aft seat and locker
TB16 Mk4
TB18
TB20 Mk2
Finished boats - finished boats to full specification including engine and full engine installations, inclusive of electrics, sealed decks, timber gunnels.
Engine options -
BETA 16
BETA 28
BETA 43
Engine installation package - comprising of engine flexible coupling and feet, engine installed and fitted with plastic flue tank, all copper flue pipes, water inlet filter and stop cock, Lloyds approved rubber exhaust silencer goose neck and skin fitting, two heavy duty batteries with heavy duty batteries leads and terminals, change over and isolating switch, Morse type single leaver controls and cables, instrument panel, engine fully wired including sacrificial anodes, one hang and one electric bilge pump.
FB propeller (16) 25mm SS shaft (18) 30mm SS shaft (20) 30mm SS shaft (24,6) 40mm SS shaft with GRP stern tube's with inner bearing greased out bearing cut less type.
|
Terms and conditions
| |
All prices in Pounds Sterling and are ex-works and ex-VAT (unless stated otherwise)
Prices will be quoted for other work and complete vessels against customers specific requirements.
General Terms and Conditions
Completion
The boat will be finished to the highest standards with the name and number inscribed. Sea Trials can be carried out in the vicinity of our boatyard prior to completion. Price on application.
Payment - Hulls Only
A deposit of 50% is required with your order. The balance is payable on completion of the hull and must be paid and funds cleared prior to the hull leaving our premises.
Payment - Complete Boats
A deposit of 25% is required with your order. Further stage payments of 25% are required during completion. Payment for engines and sterngear to be made on receipt of the pro-forma from the manufacturer. Payment of the outstanding balance is payable on completion. Full payment must be made and funds cleared prior to the boat leaving our premises. Visiting Customers are most welsome to visit our premises to see boats during the building process. In order to comply with health and safety regulations and to ensure personal attention please arrange your visit in advance. We will be pleased to arrange a demonstration, accommodation and transport if required.
Miscellaneous
All measurements, sizes and weights are approximate. All ply is to marine specification. Construction and other materials used is to scantlings as per Lloyds specifications (or better). All photos are for illustration purposes only. Treeve boats is commited to a process of continuous product development and specification may be varied from that listed in our published materials, the actual vessel, finish and fitments will be as agreed with the customer at time of order. All prices correct at date of publication. E&OE.
|
|
|
|
|
|
|
|
 |
|
 |
|
