- Red Sail 20

This vessel is available in two main versions, a Gaff rig cutter, essentially an open sailboat, and the 'Weekender' which has a cabin. GAFF RIG CUTTER   With its hull based on the rugged and Denis Swire designed and well proven Treeve DS20 this craft is built for the romantic and provided everything from hard sailing to leisure cruising depending on your mood. There is plenty of room on board for family and friends to join in and enjoy traditional Gaff Rig sailing at its best.   WEEKENDER   Dreams can come true as you cruise the coasts and islands, explore forgotten creeks and backwaters and indulge in real like adventure with family and friends.   The masts may be stepped either through the deck to step on the hog in the traditional way or in the weekend layout on a tabernacle mounted above the deck. The sailing versions are steered by a traditional timber transom hung rudder. The forward cabin is large enough to accommodate four berths.   Discover at your leisure the experience of owning and sailing one of these unique red sailboats as you embark on the journey of tour dreams.   Based on the successful and proven DS20 hull this vessel incorporates the luxury and convenience of 4 berth accommodation.

SPECIFICATIONS DIMENSIONS OVERALL LENGTH       6.10m  (20') WATERLINE LENGTH   5.67m  (18' 9") BREADTH                       2.6m     (8') DRAUGHT                       0.7m     (2' 7") CONSTRUCTION (HAND LAY-UP) HULL LAY-UP 9oz Laminate made up as follows:- 1 gel coat, Pigmented throughout or clear below waterline as preferred 1 x 1oz CSM and 5 x 2oz CSM Transom reinforced: Lay-up 2 x 2oz CSM Sheerline reinforced: Lay-up 2 x 2oz CSM Keel joint reinforced 1 x 1oz CSM and 5 x 2oz CSM Transverse frames and longitudinals 3" x 2" polyurethane expanded foam encapsulated by 3 layers x 2oz CSM, staggered Timber Inserts on sheerline Beam shelf as above according to customers own requirements  KEEL 100x20mm (4 x 3/8") steel strap with lugs. STEM Shaped galvanised stemband CATHODIC PROTECTION Zinc BILGE KEELS Approved hardwoods / Iroko 100x 50mm (4 x 2") ENGINE BEDS Hardwood 1� x engine length set in longitudinal foam stringers fore and aft encapsulated in 8oz GRP ENGINE BOX Moulded GRP soundproofed as necessary. MAST, GAFF AND BOOM Naturally seasoned grade 'A' pine SAILS Commercial grade heavy duty tan colour terylene MAINSAIL: 12.5m2 (134sq ft)   JIB: (3.5m2) 38sq ft   STAYSAIL: (3.4m2) 36sq ft RIGGING BS Standard � wire RUDDER 20mm (�") ply blade and cheeks or hardwood option RECOMMENDED ENGINES Recommended 22hp. OTHER EQUIPMENT Bilge pump, fairleads. Safety equipment to customers requirements ALL MEASUREMENTS, SIZES AND WEIGHTS ARE APPROXIMATE. ALL PLY IS MARINE PLY. HULL LAMINATE AND FRAMING TO SFIA AND LLOYDS SPECIFICATIONS (OR BETTER) WITH RESPECT TO MATERIALS AND FRAME SPACING USED. ALL PHOTOS ARE FOR ILLUSTRATION PURPOSES ONLY. TREEVE BOATS IS COMMITTED TO A PROCESS OF CONTINUOUS PRODUCT DEVELOPMENT AND THE ABOVE SPECIFICATION MAY BE MODIFIED AND DOES NOT CONSTITUTE ANY PART OF ANY CONTRACT. THE ACTUAL VESSEL, FINISH AND FITMENTS WILL BE AS AGREED WITH THE CUSTOMER AT TIME OF ORDER. E&OE.